auto

What are the best materials for a mousetrap car?

What are the best materials for a mousetrap car?
A mousetrap car can be made from cardboard or balsa wood with CD’s for wheels and axles of wood or brass tubing. Power to drive the wheels is provided by a mousetrap to which a wand and string is attached to the snap arm.

Should a mousetrap car be heavy or light?
Lighter mousetrap vehicles will require less energy at the start and can use longer lever arms for more pulling distance. Always use lightweight components when building a mousetrap vehicle. bonus tip: lightweight mousetrap vehicles require less pulling force off the start.

Are big wheels better for a mousetrap car?
Wheels and Axles Larger drive wheels will have a greater travel distance per each turn compared to smaller drive wheel. It would make sense to use a super huge drive wheel so for each turn of this massive drive wheel the mousetrap vehicle will travel an incredible distance.

What is the best amount of wheels for a mousetrap car?
So what is better, three wheels or four wheels? The answer depends on the contest, if we are to build a super fast accelerating speed-trap racer then over coming rotational inertia is one of the main objectives therefor three wheels will always do better than four wheels when it comes to performance.

How long should a mousetrap car string be?
The length of the string is about 25″. Therefore the string can be wrapped around the dowel 25/0.785 = About 31.8 times. So the minimum distance travelled will be the number of times the string can wrap around the dowel multiplied by the circumference of the wheels, which is 31.8 x 14.92 = 474.456″, or about 39.5ft!

Why are CDs good for mousetrap cars?
Why do so many mousetrap cars use CD/DVD for wheels? Because CDs and DVDs are some of the best wheels you will ever find for building a long distance mousetrap powered vehicle. CD/DVD wheels can slice through the air with very little air resistance and they have very little rotational inertia.

What is the most important thing to keep in mind when designing a mousetrap car?
Traction is a major issue when it comes to building a super fast speed-trap racer. If there is not enough traction between the drive wheels and the floor then your mousetrap racer will not be able to accelerate as designed. Use drive wheels that provide a lot of traction on the floor.

Where should the mousetrap be placed on a mousetrap car?
For optimal performance the mouse trap should be positioned on the chassis so that the tip of the lever arm falls directly above the drive axle when the mousetrap vehicle is in it’s fully wound position (as pictured bellow).

Is there a pulley in a mousetrap car?
Introduction: Mousetrap Car The car uses physics and engineering concepts such as pulleys, levers, and springs to convert potential energy to kinetic energy which moves the car along.

What makes a mousetrap car fast?
A speedy mousetrap car will have smaller wheels (faster acceleration), a shorter lever arm (increased torque, but smaller travel distance), a larger axle (increased acceleration) and will generally be smaller to decrease air resistance.

What is the best string to use for a mousetrap car?
The string has to be strong enough to handle the pulling force but flexible and thin enough to wind tightly around the drive axle. We recommend using a Kevlar based fishing line because its high strength. You should stay away from nylon fishing line and dental floss, these do not work well with mousetrap racers.

How big should a mouse trap car be?
The ideal size for an ultra big wheel on a long distance mousetrap racer seams to be somewhere between 10 and 15 inches. And the ideal size for a drive wheel on a speed-trap racer seams to be between 2 and 3 inches but no more than 4 inches.

Does the length of a mousetrap car matter?
Vehicle weight is an important factor to consider reducing if your mousetrap vehicle is not traveling far enough. The greater your mousetrap vehicle weighs, the shorter the distance it will cover and the speed it will travel. This consequence is due to the limited energy within the mousetrap.

Is wood or cardboard better for mousetrap car?
Balsa wood, pine, or bass wood are excellent choices although balsa wood is somewhat brittle and hard to drill holes into without ripping. Other materials can also be used for making a light weight strong and stiff frame. These include Styrofoam, corrugated cardboard, plastics, aluminum and brass tubing.

What do you put in a mousetrap car arm?
In most cases brass tubing and brass brazing rods make excellent lever arms because of their high-strength and light-weight. Wood can also make for a very strong and light-weight lever arm if it is used properly (see making a super long lever arm).

Why is my mousetrap car not going straight?
If a mousetrap vehicle is not traveling straight then there is one reason and one reason only: the front and rear axles are not parallel to one another!

What is the best length for a lever arm for mousetrap car?
For maximum speed, position the mousetrap 2 1/4 inches from the drive axle and cut the lever arm to a length of 4 1/4 inches. The lever arm can be cut using a dremel tool or by using a fine tooth hobby saw. The lever arm should always be “just” long enough to reach the drive axle or performance will be compromised.

Where do mice like to hide in cars?
In the engine compartment, the air inlet provides a direct path to the airbox, where mice love to nest. And from the engine compartment, a mouse can squeeze into the interior of your car through a vent or holes designed for wires, cables, pedals or your steering column.

What is the fastest mousetrap car design?
The Speed-Trap Racer is the fastest mousetrap powered racer anywhere and was designed after Doc Fizzix’s own record-setting mousetrap racer that traveled 5 meters in 1.2 seconds.

How do you make CD wheels for a mousetrap car?
Simply fit your CD over the end of your axle and secure it tightly using a rubber band tied around each side of the wheel. Your axle should be small enough to fit inside the CD snugly. The tire has to turn with the axle, so it should fit as snuggly as possible.

LEAVE A RESPONSE

Your email address will not be published. Required fields are marked *