auto

What materials are good for mousetrap car?

What materials are good for mousetrap car?
A mousetrap car can be made from cardboard or balsa wood with CD’s for wheels and axles of wood or brass tubing. Power to drive the wheels is provided by a mousetrap to which a wand and string is attached to the snap arm.

Should a mousetrap car be heavy or light?
Lighter mousetrap vehicles will require less energy at the start and can use longer lever arms for more pulling distance. Always use lightweight components when building a mousetrap vehicle. bonus tip: lightweight mousetrap vehicles require less pulling force off the start.

What kind of string is best for a mousetrap car?
The string has to be strong enough to handle the pulling force but flexible and thin enough to wind tightly around the drive axle. We recommend using a Kevlar based fishing line because its high strength. You should stay away from nylon fishing line and dental floss, these do not work well with mousetrap racers.

Are big wheels better for a mousetrap car?
Wheels and Axles Larger drive wheels will have a greater travel distance per each turn compared to smaller drive wheel. It would make sense to use a super huge drive wheel so for each turn of this massive drive wheel the mousetrap vehicle will travel an incredible distance.

How long should a mousetrap car string be?
The length of the string is about 25″. Therefore the string can be wrapped around the dowel 25/0.785 = About 31.8 times. So the minimum distance travelled will be the number of times the string can wrap around the dowel multiplied by the circumference of the wheels, which is 31.8 x 14.92 = 474.456″, or about 39.5ft!

What is the fastest mousetrap car design?
The Speed-Trap Racer is the fastest mousetrap powered racer anywhere and was designed after Doc Fizzix’s own record-setting mousetrap racer that traveled 5 meters in 1.2 seconds.

What is the most important thing to keep in mind when designing a mousetrap car?
Traction is a major issue when it comes to building a super fast speed-trap racer. If there is not enough traction between the drive wheels and the floor then your mousetrap racer will not be able to accelerate as designed. Use drive wheels that provide a lot of traction on the floor.

Why is my mousetrap car not going straight?
If a mousetrap vehicle is not traveling straight then there is one reason and one reason only: the front and rear axles are not parallel to one another!

Is weight important in a mousetrap car?
The greater your mousetrap vehicle weighs, the shorter the distance it will cover and the speed it will travel. This consequence is due to the limited energy within the mousetrap.

What does the lever arm do in a mousetrap car?
Changing the length of a mouse trap’s snapper (or lever arm) is how you control a mousetrap vehicle’s acceleration and/or travel distance. Different lengths of lever arms can be used to increase and/or decrease the pulling force and change the amount of string that can be pulled off the drive axle.

How do you make a fast mousetrap car?
If you haven’t realized it yet, increasing the length of the lever arm attached to the mousetrap, increases the total mechanical advantage of the car. Therefore, to increase your car’s speed, you can reduce the length of the lever arm attached to the mousetrap.

How big should mousetrap car wheels be?
The ideal size for an ultra big wheel on a long distance mousetrap racer seams to be somewhere between 10 and 15 inches. And the ideal size for a drive wheel on a speed-trap racer seams to be between 2 and 3 inches but no more than 4 inches.

Does the length of a mousetrap car matter?
Vehicle weight is an important factor to consider reducing if your mousetrap vehicle is not traveling far enough. The greater your mousetrap vehicle weighs, the shorter the distance it will cover and the speed it will travel. This consequence is due to the limited energy within the mousetrap.

Is wood or cardboard better for mousetrap car?
Balsa wood, pine, or bass wood are excellent choices although balsa wood is somewhat brittle and hard to drill holes into without ripping. Other materials can also be used for making a light weight strong and stiff frame. These include Styrofoam, corrugated cardboard, plastics, aluminum and brass tubing.

What is the best length for a lever arm for mousetrap car?
For maximum speed, position the mousetrap 2 1/4 inches from the drive axle and cut the lever arm to a length of 4 1/4 inches. The lever arm can be cut using a dremel tool or by using a fine tooth hobby saw. The lever arm should always be “just” long enough to reach the drive axle or performance will be compromised.

How do you make a mousetrap car go forward and backwards?
To make a reversing mousetrap car go forward and then come back you will need to know how to “back-wind” the string. Back-winding the string it a technique where you first wind the string around the axle in one direction and then rewind the string in the opposite direction.

Why is my mousetrap car not moving?
If you place your mousetrap vehicle on the ground and the vehicle does not move, or it does not accelerate as quickly as needed, then you can do one of two things, you can shorten the length of the lever arm and reposition the mouse trap closer to the drive axle or you can build up the drive axle with tape (see how to …

Are CD wheels good for mousetrap car?
Because CDs and DVDs are some of the best wheels you will ever find for building a long distance mousetrap powered vehicle. CD/DVD wheels can slice through the air with very little air resistance and they have very little rotational inertia.

Is overall weight important in mousetrap cars?
Reduce the most friction you can because the more friction the more energy is lost in propelling the car. Mass should also be taken into account, the more the car weighs the more energy from the mousetrap spring will be used so it’ll be best to make the car light weight.

What is the best shape for a Pinewood Derby car?
But aerodynamics rule the day, and the best shape is a simple wedge. Just like a spoiler on the rear of a sports car, the wedge shape allows as much air to flow over the top of the car without hinderance while keeping the car pinned to the track.

LEAVE A RESPONSE

Your email address will not be published. Required fields are marked *